CBT Motorcycle Course For Novice Riders
A1 allows you to ride a scooter or small motorcycle, and take the pillion ride of a passenger if you are 17 or older.
Two-day class without tests. It's an excellent introduction to riding, with a focus on reviewing the primary parts of a bicycle and slow exercises for controlling.
Compulsory basic training (CBT)
CBT is a must-attend course for all riders who are new to the sport. It typically takes a full day to complete. If you are able to meet the required standards at the end of the course your instructor will present you with a certificate of accomplishment which is known as a DL196.
In this class you will learn the fundamentals of operating a motorcycle. You will be guided throughout the course by a knowledgeable instructor. You will also be given an hour of theory to help you understand the road code, the rules of the road and safe way of lane positioning. You'll learn how to maintain and check your bike, and how to carry a pillion passenger (if appropriate).
The next part of the CBT is a practical on-site riding. Your instructor will mark out an area of safety for you to practice your skills, beginning off slow and performing basic safety checks, before moving off and stopping the motorbike and braking properly. During this time, your trainer will be in radio communication with you and will assist until they are satisfied that you can perform these exercises at a safe level.
In this section of the training, you'll be introduced to different types of roads and traffic conditions. You'll learn how to safely deal with traffic lights and roundabouts and also how to use one way streets. You'll also learn the basics of cornering and how to carry out figure of 8 and emergency stop.
This is the final portion of the CBT, and your instructor will take you out on a variety roads. You will be in constant contact with your instructor who will keep track of your progress. If you can successfully demonstrate your ability to drive a motorcycle in traffic and manage diverse road conditions, you will be awarded with an CBT DL196 certificate.
While it has been around for a while now, CBT is still a essential part of motorcycling and we continue to see significant improvement in the statistics of accidents since its inception. It is important that you select a motorcycle school that provides comprehensive CBT classes to ensure that you are fully prepared and ready for your journey into the world of motorbikes on two wheels.
Module 1 Theory Test
The first step to obtaining an A1 licence is passing your motorcycle test. This test takes 40 minutes to assess your understanding of road rules, traffic signals and general riding safety. To maximize your chances of passing, it is recommended that you read the Highway Code prior to taking the test.
The next day, following your CBT, you'll begin module 1 training on the test-capacity bike for your licence category. If you're looking at an A1 then this is a Honda Monkey. The course includes plenty of off-road control and balance practice to prepare you the required moves for the module 1 test. You will also visit a DVSA test center to familiarize yourself with the marking and procedures that are used for each test.
At the end of your training, you'll be able to pass your module 1 test at a DVSA-approved motorcycle testing center. You'll need your CBT certificate, along with a valid passport or photocard driving license.
Once you've passed your Module 1 and passed the test, you'll then be able to take your Module 2 test, which is conducted on the roads. kartaxpresspoland.com will guide you on a brief ride around the area, and you'll have 35 minutes to complete the test on your own. The examiner is assessing your ability of multitasking while following road signs and will require that you demonstrate good driving skills.
After passing both Module 1 and Module 2, you will be able to enjoy the freedom of an A1 light licence. This will permit you to ride bikes up to 125cc without the requirement of a learner's licence. You will also no longer be required to display your L plates. A1 licenses also allow you to ride with a companion and you don't need to take the CBT every 2 years. This is a fantastic option for those looking to share the excitement of motorcycling. The next step from an A1 licence is the A license that is unrestricted and requires a full driving licence.
Module 2: Practical Test
Module 2 is the practical portion of your motorcycle license. After passing Module 1 and the theory test, you are ready to take Module 2. This test will grant you an A1 license which allows you to ride motorcycles up to 125cc and with the maximum power of 11 BHP. You are also able to take a ride on motorways and transport passengers.
The Mod 2 test is an independent riding test lasting about 10 minutes. The examiner will be following you on a predetermined road route that has varying traffic and road conditions. The route will include busy junctions, roundabouts, and dual carriageways and you'll need to be able to ride in a variety of conditions.
In addition to being able to navigate busy roads, the Module 2 test will assess your ability to observe and anticipate. This is vital as it allows you to make quick decisions when driving on the road. You will have to be able to react quickly if, for instance you are driving along the road and notice that a vehicle is moving into your path.
You'll also need to show good control at a slow speed for example, being able to pull away smoothly and stop in a safe manner and maintain speed. You must be able to demonstrate good braking, and execute a controlled U turn when required.
Then you'll be tested on your ability to signal and shift gears. You will be asked to signal before overtaking another vehicle, when you exit an intersection, and to change gears when necessary.
After you've passed both sections of the Module 2 test, you'll receive your A1 license via mail. You can then ride your new bike in fashion and comfort through the countryside, or even to work. Whether you choose to ride a supermoto or a scooter, your new A1 licence will open the door to freedom, adventure and excitement.
Licensing
This course is designed for those who have already completed Module 1 and 2 and wish to enhance their riding skills and develop a bond with their bike. It typically involves more advanced exercises & training such as looking through your turns and leaning to control your bike at higher speeds. It also covers hazard prevention and high speed cornering, as well as stopping and braking at high speeds. You will be out on the road for 6 hours with a Ride coach, and you are able to choose your own bike.
This is a great option for drivers who are unsure if a full license is what they really would like. This package includes Module 1 and 2 tests as well as the off-road skills required to obtain your Cat A license.
You will begin on an e-bike to get comfortable with your riding position and your balance before moving up to a larger bike for your class. It is typically a 500cc motorbike. You will be riding your own bike for this course and you can use your own helmet or can purchase one from us.
The BRC is a 5-day course that provides the education and practice you need to become a licensed motorcycle rider in the state of Tennessee. The BRC is a 5-day course that provides the information and practice you need to become a licensed motorcyclist in Tennessee.
You must be at least 16 years of age to take part in the Basic RiderCourse (BRC). If you are younger than 18 years old, you will need a parent or guardian's signature on both the Covid Release, Waiver and Indemnification forms (click here) and the Motorcycle Safety Program Parent/Guardian Agreement form. Your parent or guardian must also sign the MSF's ecourse prior to taking your BRC class.